M.Eng. German 3 Semesters

Additive Manufacturing and Lightweight Design

Hochschule für angewandte Wissenschaften Coburg Coburg, Germany

Check these details before you apply

We compile this page from Hochschule für angewandte Wissenschaften Coburg's own published information and re-check our programme data on a rolling basis. Universities still change entry requirements, fees and deadlines during the year, and some details here may be incomplete or out of date. Treat this page as a starting point and confirm anything that affects your application on the official source.

Last updated 26 August 2026 Official programme page Spotted an error? Tell us

Key Facts

Degree

M.Eng.

Duration

3 Semesters

Type

Postgraduate

Accreditation

Akkreditiert (Auflagen erfüllt)

Until Sep 2031

ECTS Credits

90 ECTS

Language

German

Campus

so it

Intakes per Year

IELTS

IELTS Academic minimum overall score 5.5 for English-taught programmes at B2 level; 7.0 wh...

German Requirement

German B2 CEFR required before enrolment in German-taught programmes. Recognised: DSD II;...

Am I Eligible?

Check in 30 seconds — free

Hochschule für angewandte Wissenschaften Coburg

Fachhochschulen / HAW · Bayern

Tuition & Fees

EU / EEA Students

tuition:: None (public university)

Non-EU / International

tuition:: None

Not sure if this programme is right for you?

Get a free evaluation from our consultants — no commitment needed.

Free Profile Evaluation

Hochschule für angewandte Wissenschaften Coburg, a Fachhochschulen / HAW in Coburg, Germany offers an M.Eng. in Additive Manufacturing and Lightweight Design, spanning 3 semesters (90 ECTS credits). Instruction is in German, so applicants need to demonstrate German proficiency (typically DSH-2 or TestDaF 4×4); the programme holds Akkreditiert (Auflagen erfüllt) accreditation. GradGermany provides end-to-end support for Indian students applying to master's programmes in Germany — from eligibility assessment and SOP review to visa guidance and post-arrival settlement.

Entry Requirements

English Proficiency

English B2 proof required before enrolment in English-taught programmes. Recognised: Cambridge B2 First min 160 (grades A/B/C); IELTS min 5.5 overall; PTE Academic min 59; TOEFL iBT min 72 (new 2026 scoring: minimum overall 4); UNIcert/NULTE Level II (B2); telc English B2; Oxford Test of English Advanced min 111; higher education entrance qualification stating B2 explicitly or grade 4 ('sufficient') in English; official confirmation of English as language of instruction of a bachelor's degree; passed university English module at B2; ECL certificate B2 in all four sections. C1-level certificates accepted as higher proofs: Cambridge C1 Advanced min 180, IELTS 7.0, PTE Academic 76, TOEFL iBT 95+ (new scoring 5), UNIcert III, telc C1, Oxford Test of English C1 141-170.

German Language

German B2 CEFR required before enrolment in German-taught programmes. Recognised: DSD II; DSH at least level 1; TestDaF with TDN 3 in all four sections; Feststellungspruefung (Studienkolleg assessment test); Goethe-Zertifikat at least B2; 'Deutsche Sprachpruefung' of the SDI Munich; telc German B2 or telc C1 Hochschule; OeSD at least B2; KMK/HRK-recognised proofs; holders of a German-equivalent school-leaving qualification; confirmation of German as language of instruction of a prior degree; a degree in German studies; passed German module at required level; ECL certificate B2+. A1-level proofs (DSD I, Goethe/telc/OeSD A1 etc.) are accepted only where a programme requires just A1. The Studienkolleg Coburg does not currently offer a DSH preparation course.

Verified from the university's official page

Application Periods

Winter Semester Semester

Entry: 15 Jun

Summer Semester Semester

Entry: 14 Mar

Admission Requirements

The following is a summarised overview of requirements for this programme. Always verify details directly with the university before applying.

Academic Qualifications

Mindestens 210 ECTS (in der Regel 7 Semester) einschließlich eines praktischen Studiensemesters (min. 18 ECTS). Fehlende Kompetenzen in Theorie und Praxis können innerhalb eines Jahres nach Beginn des Masterstudiums nachgeholt werden

Requirements are summarised for informational purposes. Refer to the university's official admissions office for complete and current requirements.

Locations

Coburg Lichtenfels

Subject Groups

Mechanical Engineering Art, Music & Design

Study Fields

Fertigungstechnik Konstruktionstechnik Maschinenbau Physikalische Technik Werkstofftechnik Wirtschaftsingenieurwesen

Study Forms

Präsenzstudiengang Vollzeit

Frequently Asked Questions

Yes. Hochschule für angewandte Wissenschaften Coburg welcomes international applicants for its M.Eng. in Additive Manufacturing and Lightweight Design in Coburg. You will typically need a recognised bachelor's degree in a related field, language proficiency documentation, and a complete application package. GradGermany guides you through every step.

The programme runs for 3 semesters (approximately 1.5 years), totalling 90 ECTS credits.

This programme is taught in German. You will need to prove German proficiency, typically DSH-2 or TestDaF 4×4. Some universities accept Goethe-Zertifikat C1.

Tuition fees vary. Most public German universities charge no tuition — only a semester contribution of approximately €150–€350. Additional costs include health insurance (~€120/month), the blocked account requirement (€11,904/year), and living expenses.

You can apply via uni-assist or directly through the university's admissions portal. GradGermany handles your full application — SOP writing, document preparation, submission, and visa support.

Want our guides higher up in Google?

Mark GradGermany as a preferred source and Google gives our pages more room when you search about studying in Germany. Takes one tap, and you can undo it any time from the same screen.

Add as preferred source